The way cables are fixed into place is very important. Poor clamping can damage the cable or put undue strain on cable terminations or the cable conductors, sheathing or insulation. Intertech designs and manufactures a range of CABUS cable clamps as well as supplying a range of ASEPlas and Prysmian cable cleats. This ensures we have the cable clamps and cleats to suit all cable types and applications.
Our complete Clamp Catague and datasheets are available from the Downloads page.
CABUS Cable Clamps
The CABUS range of clamps are Australian-made using marine grade cast aluminium. A complete range of single way and trefoil clamps are available.
- In the 54, 58 and 59 series cable clamps, an optional neoprene liner can be provided for additional protection of cables if required.
The 51 Supergrip series is a single way clamp designed for channel mounting. These are a very compact clamp using a single bolt for mounting and fixing.
The 54 series clamps are designed for trefoil cable configurations. Most sizes have a central fixing hole in the base for ease of installation. Clamps in this series provide bursting strength cable fixing at an economical price.
Simple two-bolt fix and locate cable clamp. The 58 series clamp is designed for channel mounting.
Simple two-bolt fix and locate cable clamp. The 59 series is a flat base clamp for surface mounting.
Intertech Engineering can design and manufacture cast or machined clamps to suit special applications. Contact our staff for any application.
The KOZ range of clamps are made from light-weight UV resistant glass-fibre reinforced polyamide material. The clamps are suitable for Indoor and Outdoor installations, and have been extensively tested in UL and KEMA laboratories.
The ST and STC clamps are single way type clamps. Each clamp size accepts a wide range of cable diameters, and can be easily stacked. The STC clamps have an additional centre fixing hole in the base of the clamp.
The TRI clamps are designed for trefoil cable installations. The clamps are designed to withstand high short-circuit currents and accept a wide range of cable diameters.
The UNI mounting block system is designed to house large numbers of cables together. The blocks can be interlocked to arrange large numbers of cables in a horizontal spaced configuration, and then can also be stacked vertically.
Torgy Atlantic ASEPlas Cable Cleats
Torgy ASEPlas Cable Cleats are manufactured from a glass reinforced composite material. The cleats are a high strength design for medium and high voltage cables. As well as conventional single and trefoil applications, the cleats are ideal for bridges, tunnels and masts.
Glass reinforced composite cable cleats to support single, medium and high voltage, power transmission cables, typically 33 – 500 kV.
Channel mounted, glass reinforced composite cable cleats to support single, medium and high voltage power transmission cables, typically 33 – 500 kV.
Glass reinforced composite cable cleats to support trefoil, medium and high voltage power transmission cables, typically 33 – 500 kV.
Prysmian Cable Cleats
The Prysmian range of Multicleat and Multistrap stainless steel clamps available to suit extreme fault ratings. The cleats consist of a corrosion resistant base with a stainless steel strap for securing either single cables or cables in trefoil arrangements. The strap arrangement provides extreme flexibility in securing a range of cable diameters. Complete pole kits as well as special clamp design services available.
Prysmian also manufacture a wide range of other cable cleats which can be supplied upon request.